Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Blog Article
Don't undervalue the forklift at work. If the operation is not good, there will be major mishaps in mins, and there are several crashes entailing forklifts.
Instance 1: The forklift freight blocked the motorist's view, and the person in front might not be discovered, leading to a rolling accident.
Case 2: In order to maintain the balance of the forklift when raising hefty items, the staff members utilized their body weight as the counterweight, which nearly triggered casualties.
Situation 3: The width of the forklift freight goes beyond the allowed size of the path and hangs on the roadside shelf, which virtually creates an mishap.
Situation 4: Forklift is speeding and surrender throughout a turn.
Situation 5: The forklift chauffeur did not notice the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift raises the workers illegally, the forklift vehicle driver does not put on the seat belt, the forklift lifter falls and the vehicle driver is squashed when the forklift rolls over.
Instance 7: The forklift chauffeur did not wear a safety belt and fell from the vehicle when it surrendered and was squashed.
Forklift operation need to take notice of these matters ：.
Start.
1. Prior to starting, observe the environments, and after verifying that there are no obstacles that prevent the security of driving, honk the horn initially and then begin.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before beginning.
3. When the forklift starts with a lots, the chauffeur should first validate that the tons is steady and dependable.
4. The beginning should be slow-moving and stable.
Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the mast must be tilted backwards. .
2. Do not raise the fork too high when driving. When getting in and leaving the work site or while driving, take care that there will be no challenges in the sky. When the tons is traveling, the fork must not be elevated too expensive, which will certainly impact the stability of the forklift. .
3. After dumping, the fork needs to be lowered to the regular driving placement before driving. .
4. When turning, if there are pedestrians or vehicles close by, the driving signal should be issued first. High-speed doglegs are forbidden. High-speed doglegs will certainly trigger the automobile to shed side stability and topple. .
5. When the forklift is downhill, it is purely prohibited to switch off the fire and slide, and it is prohibited to brake unexpectedly while driving with loads unless there are special circumstances.
6. When the forklift is running, it must obey the website traffic rules in the manufacturing facility and must maintain a certain safety distance from the lorry in front. .
7. When the forklift is running, the tons has to be in the lowest setting that does not prevent the driving, and the gantry should be appropriately tilted back. The load shall not be increased other than when piling or filling. .
8. The elevation of the load need to not obstruct the motorist's view. In special conditions, when the thing affects the forward vision, drive at a reduced rate when turning around.
9. It is forbidden to switch on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving rate of the forklift in the factory location is 5 km/h, and it needs to drive safely at a low rate when going into the production workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for workers to depend on the fork to hold products and play a stabilizing role. .
12. If problems are located, they will be fixed and reported in a prompt way, and they will certainly never ever run with diseases or conceal them.
loading and dumping.
1. When fork-loading items, the distance in between both forks must be changed as required to make the load of the two forks balanced and not skewed, and one side of the item must protest the shelf. .
2. It is forbidden to work with a solitary fork or use a fork top or pull. In unique scenarios, safety warning signs must be established to remind bordering pedestrians. .
3. In the process of packing and discharging things, the forklift must be stopped with the brake. .
4. The speed of the lorry need to be sluggish and steady. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled items Stand-on Electric Pallet Stacker and injure people. .
5. When utilizing a fork to fork the goods, the fork should be as deep as possible under the lots, and it needs to be kept in mind that the fork tip must not touch various other products or things. The load should be stabilized with very little back tilt of the gantry so that the tons does not move backwards. The pole can be slanted ahead a little when the lots is lowered to enable simple placement of the tons and extraction of the forks. .
6. It is restricted to fork goods at high speed and collide with difficult objects with the fork head. .
7. When the forklift is functioning, it is restricted for people to loaf the fork, so as to prevent the collapse of the goods and hurt individuals. .
8. Straining is forbidden, and it is banned to use forks to raise personnel to engage in high-altitude procedures to prevent high-altitude falling accidents. .
9. It is not permitted to utilize the brake inertia to slip, place, round or roll objects. .
10. It is not permitted to utilize forks to pick, transform pallet discharge.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you must discharge the goods or reduced the fork structure.
2. Pull the parking brake manage to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique conditions, such as the driver does not leave the vehicle's line of sight and does not exceed 1 minute).
4. Remove the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Examine the security performance of starting, running and stopping.
3. Examine whether the lights and horn signals are total and efficient.
4. During the operation of the forklift, examine whether the stress and temperature are normal.
5. After the forklift is running, the exterior leak ought to also be checked and the seals need to be changed in time.
Forklift Safety Operation Specifications.
1. You should check prior to leaving the auto;.
2. When you come across somebody in front of you throughout driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be as well sharp to prevent the propensity of " totally free switching";.
6. Running up and down the incline must be slow and consistent, and no turning on the incline is enabled.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel bring the goods and move forward, if they come across large or hefty goods and go to the vehicle driver's line of vision, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia pressure to grab the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll objects.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under Electric Forklift Truck for Warehouse the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Auto parking is not allowed under the following conditions.
1. Curves, narrow roadways, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the area with the very same size as the barrier should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844